• Document: Configuring the SPA112 ATA to operate with the CUCM
  • Size: 1.92 MB
  • Uploaded: 2019-07-21 03:41:51
  • Status: Successfully converted


Some snippets from your converted document:

Configuring the SPA112 ATA to operate with the CUCM Contents Configuring the SPA112 ATA to operate with the CUCM ............................................................................. 1 Scenario: ....................................................................................................................................................... 2 Overview: ...................................................................................................................................................... 2 Configuring the CUCM .................................................................................................................................. 2 Overview ................................................................................................................................................... 2 Detailed Instructions ................................................................................................................................. 2 Configuring the SPA112 ATA ....................................................................................................................... 13 Overview ................................................................................................................................................. 13 Detailed Instructions ............................................................................................................................... 13 Verifying Registration Status....................................................................................................................... 18 CUCM ...................................................................................................................................................... 18 SPA112 .................................................................................................................................................... 18 Testing ......................................................................................................................................................... 19 SPA112 Inbound Calls ............................................................................................................................. 19 SPA112 Outbound Calls .......................................................................................................................... 19 SIP Registration Packet Trace...................................................................................................................... 19 Troubleshooting: ......................................................................................................................................... 23 SIP REGISTER: 404: Not found: Warning 399 "Unable to find device/user in database" ...................... 23 Possible Solution ................................................................................................................................. 23 SIP REGISTER: 404: Not found: Warning 399 "Line not configured" ..................................................... 24 Possible Solution ................................................................................................................................. 25 Outbound Call Fails with "Call cannot be completed as dialed" Message ............................................. 25 Possible Solution ................................................................................................................................. 25 Additional Resources .................................................................................................................................. 26 th SPA112 firmware versions 1.2.1(004) and newer April 5 2013 Check for updates at: https://supportforums.cisco.com/docs/DOC-31744 Scenario: You have a Cisco Unified Communications Manager (CUCM) system and want to configure a SPA112 analog telephone adaptor (ATA) to register to the CUCM so that you can use up to two analog phones or similar FXS devices with the CUCM. Overview: In this application note, I have a Cisco Business Edition 6000 (informally also known as the BE6000 or BE6k). My BE6000 is running CUCM 9.0.1.10000-37. I have a SPA112 ATA running 1.3.1(003) firmware and an analog phone connected to the PHONE 1 port of the SPA112. 1. The CUCM has a 4-digit internal dial plan starting with 1. 2. The CUCM is already configured and has other users and phones configured and able to make calls with each other. 3. The SPA112 ATA is starting from a factory defaulted state. Configuring the CUCM Configuring the CUCM is a discipline unto itself. This is why folk work so hard at acquiring their CCIE Voice certification. This application note does not address important topics such

Recently converted files (publicly available):